How To Replace Interior Door Frame Trim

How to Replace Interior Door Frame Trim

Replacing interior door frame trim is a relatively simple task that can update the look of your home while also improving the functionality of your doors. By following these steps, you can easily replace the trim around your interior doors. ### Materials You'll Need: * New door frame trim * Miter saw or miter box * Measuring tape * Pencil * Level * Nail gun or hammer and nails * Wood filler * Sandpaper * Paint or stain (optional) ### Step 1: Remove the Old Trim Start by removing the old trim around the door frame. Use a pry bar to gently pry the trim away from the frame. Be careful not to damage the frame or the wall. ### Step 2: Measure and Cut the New Trim Measure the length of each side of the door frame and cut the new trim to size using a miter saw or miter box. Make sure to cut the trim at a 45-degree angle on both ends so that the pieces will fit together neatly. ### Step 3: Install the New Trim Start by attaching the top piece of trim to the door frame. Use a nail gun or hammer and nails to secure the trim in place. Make sure to level the trim before nailing it in. ### Step 4: Attach the Side Trim Next, attach the side pieces of trim. Start by attaching the trim to the top piece, then nail it into the door frame. Make sure to level the trim before nailing it in. ### Step 5: Fill Nail Holes and Sand Once the trim is installed, fill any nail holes with wood filler. Allow the wood filler to dry, then sand it smooth. ### Step 6: Paint or Stain (Optional) If desired, you can paint or stain the new trim to match the rest of the door and frame. ### Tips for Success: * Use a sharp blade on your miter saw to ensure clean cuts. * Dry fit the trim before nailing it in place to make sure it fits properly. * Countersink the nails slightly below the surface of the trim using a nail set. * Use a small amount of wood glue to help hold the trim in place. * If you're not sure how to cut a 45-degree angle, use a miter box.