How To Replace Interior Door Frame

Replacing an interior door frame is not a difficult task, but it does require some basic carpentry skills and a few essential tools. By following these steps, you can easily replace your old door frame with a new one.

Tools Required

Hammer
Pry bar or crowbar
Utility knife
Circular saw
Tape measure
Level
Caulk gun

Materials Required

New interior door frame
Wood shims
Caulk

Step-by-Step Instructions

1. Remove the Old Door Frame
- Start by removing the door from the frame.
- Use a utility knife to cut the paint or caulk around the frame.
- Insert a pry bar or crowbar between the frame and the wall and begin to pry the frame loose.
- Be careful not to damage the wall or the frame. 2. Measure and Cut the New Door Frame
- Measure the height and width of the door frame opening.
- Cut the new door frame to the correct size using a circular saw. 3. Install the New Door Frame
- Place the new door frame into the opening and align it with the wall.
- Use wood shims to level and square the frame.
- Nail the frame into place. 4. Install the Door
- Place the door into the frame and align it with the frame.
- Insert the screws into the hinges and tighten them. 5. Caulk the Frame
- Apply a bead of caulk around the inside edge of the frame.
- Smooth the caulk with your finger or a caulk tool.