Replacing Interior Door Frame Molding

Replacing interior door frame molding is a relatively simple task that can add a fresh, updated look to your home. It is important to choose the right molding for your door and style of home, and to take the time to do the job correctly. Here are the essential steps involved in replacing interior door frame molding:

1. Remove the old molding. Using a pry bar or a flathead screwdriver, carefully pry the old molding away from the door frame. Be careful not to damage the door frame or the wall.

2. Clean the door frame. Use a damp cloth to clean the door frame and remove any dirt or debris. This will help the new molding to adhere properly.

3. Measure and cut the new molding. Measure the length of the door frame and cut the new molding to size. Use a miter saw to cut the molding at a 45-degree angle at each end. This will allow the molding to fit together snugly at the corners.

4. Install the new molding. Apply a thin bead of construction adhesive to the back of the molding. Press the molding into place on the door frame, starting at one corner and working your way around. Use a nail gun or a hammer and finishing nails to secure the molding to the door frame.

5. Fill in the nail holes. Once the molding is installed, use a wood filler to fill in the nail holes. Allow the wood filler to dry completely, then sand it smooth.

6. Paint or stain the molding. If you want to paint or stain the molding, do so after the wood filler has dried completely. Use a brush or a roller to apply the paint or stain, and allow it to dry completely before using the door.

Replacing interior door frame molding is a relatively simple task that can add a fresh, updated look to your home. By following these steps, you can easily complete the job yourself.